ZY-TS
Three-Chuck Tube Fiber Laser Cutting Machine
Technical Parameters
| model | ZY-TS6020 | ZY-TS6035 | ZY-TS12012 | ZY-TS12035 | |
|---|---|---|---|---|---|
| Effective Square Round Cutting Diameter | Φ15-Φ220mm | Φ10-Φ350mm | Φ15-Φ220mm | Φ15-Φ350mm | |
| Effective Square Tube Cutting Diameter | □15-□150mm | □10-□240mm | □15-□150mm | □15-□350mm | |
| Power | 1000w/1500w/2000w/3000w/4000w/6000w | ||||
| Effective Tube Cutting Length | 6000mm | 12000mm | |||
| Positioning Accuracy | ±0.03mm | ||||
| Repeated Positioning Accuracy | ±0.02mm | ||||
| Max.Moving Speed | 100m/min | 80m/min | |||
True 3-Chuck Synchronized Motion – Industry’s Most Stable Tube Support
- Front + Middle + Rear chucks move in perfect sync with laser head
- Eliminates tube vibration, sagging, and deflection during high-speed cutting
- Enables ±0.05mm accuracy even on thin-wall, long-length tubes
💡 Why it matters: Single or dual-chuck machines struggle with tubes >4m — ours cuts 12m seamless.
Zero Tail Material Waste – Cut to the Very End
- Traditional 2-chuck machines leave 300–500mm unusable tail
- Our 3-chuck system repositions dynamically, allowing full utilization of the entire tube
→ Saves 5–8% material per 6m tube → $ 10,000+ annual savings at scale
High-Speed, High-Precision Cutting for Complex Geometries
- 4-axis(X, Y, Z, B-axis rotation) + optional tilting head for bevels
- Cuts holes, slots, notches, miters, and 3D contours in one setup
- No manual repositioning → no alignment errors, no secondary machining
🏭 Ideal Applications
- 🏗️ Construction: Handrails, guardrails, scaffolding, truss chords
- ☀️ Solar Energy: Torque tubes, mounting structures (6m+ aluminum tubes)
- 🚛 Transportation: Truck chassis, trailer frames, bus structures
- ⚙️ Heavy Machinery: Hydraulic cylinders, boom arms, support frames
Include real photo: “12m solar torque tube with precision-cut mounting slots”
❓ FAQ
Q: Why do I need 3 chucks instead of 2?
A: For tubes >4m, 2 chucks cause sagging in the middle → poor cut quality and vibration. 3 chucks provide continuous support, enabling high-speed, high-precision cutting on long tubes.
Q: Can it handle bent or slightly curved tubes?
A: Yes! With optional laser vision or 3D probe, the system maps the actual tube shape and adjusts the cutting path in real time.
Q: What’s the ROI vs a standard 2-chuck machine?
A: While upfront cost is ～15% higher, you save 5–8% on material + reduce scrap + enable new long-tube jobs → ROI in 6–10 months.
📩 CTA Section
Stop Wasting Tube Ends & Struggling with Long Parts
👉 [Send Your Longest Tube Drawing – Get Free Feasibility Report]
Includes:
👉 [Send Your Longest Tube Drawing – Get Free Feasibility Report]
Includes:
- 3D simulation of your part
- Material utilization analysis
- Recommended configuration (power, length, options)
Engineered for real-world production.
✅ Trust Badges
- 🔧 3-year warranty on motion system | 🌐 Installed in USA, Germany, Saudi Arabia, Australia
- 📐 Certified cutting accuracy reports available
- 📦 Factory acceptance test (FAT) video provided before shipment